Ender 5 Rotatable LCD Holder with LCD Cover

thingiverse

Based on Holex01's groundbreaking design, I've made significant improvements: 1. Integrated an optional LCD cover (see instructions below) 2. Reversed the direction of the M3 screw to enable tightening at an angle (this also necessitated a slight adjustment to the "T" piece to accommodate the bolt's movement) 3. Expanded the tolerances of the Y piece, catering to slightly less-than-optimal printers Installing the LCD Cover: Before installing the LCD into the main case, push the Hinge Connector from inside the Main case into the designated slot. The LCD will secure it in place once installed; however, feel free to glue it if necessary for added stability. I employed 2 pins as hinge pins. [UPDATE: 04 March 2020] I designed a holder for a 6x1mm neodymium magnet which I glued to the back of the printer, and also attached a similar magnet to the inside of the cover; it's working flawlessly! The cover closes with a satisfying snap and releases easily when opening.