Ender 5 Plus with Biqu H2 V2S Linear Rail Conversion Kit

prusaprinters

This is a X and Y axis linear rail conversion kit for the Ender 5 Plus with Biqu H2 V2S extruder. It is designed to be durable, low profile and lightweight.A durable and heat-resistant material should be used, PolyMax Polycarbonate is strongly recommended. It is recommended to print with thicker walls (e.g. 5) and higher infill of 50-80% for strength purposes.The Y-Axis belts will need to be replaced, but the X-Axis belt and be re-used. Use soft jaw pliers or alternate technique to press in the hex nuts for the Y-Axis carriages and the BLtouch mounting location. Use a minimum of 2 centering jigs per rail to ensure proper alignment, square the X and Y axis when performing final tightening.Probe offset is X-35.30 Y+5.25. Printed Parts Conversion Kit:Front Mounting Plate (Original)Rear Mounting Plate (Original)Cable Holder Guide (Original)(2) of Y-Axis Linear Rail Mount (Remix) Printed Parts Needed by Others:X-Carriage Conversion Kit by BongoDaddyMGN12 Linear Rail Centering Jig by mjbuddenX-Axis Limit Switch by Jacob_115744Y-Axis Limit Switch by Jacob_115744BLtouch Bracket V5.5 by JLCURTIS Required Hardware:(3) of MGN12 450mm Linear RailButton Head Hex Screws(8) of M5x12mm(2) of M3x10mmSocket Head Hex Screws(2) of M4 x 14(2) of M4 x10(1) of M3x12(3) of M3 x 10(30) of M3x8Hex Nuts(2) of M5 Hex Nuts(2) of M3 hex nuts20 Series T-Slot Nuts(12) M3(3) M4M4 and M3 heat insertsY-Axis BeltsBelt Buckle Clamps Optional Parts:2020-1 Y Axis TensionerBiqu H2 V2 Nozzle 5015 Fan Duct by Taeky5015 Blower Fan Tools:Soft Jaw PliersAllen Key Set Note: Amazon links are affiliates.