Ender 5 plus linear rail block

prusaprinters

<p>When you get your aliexpress linear rails for your Ender 5 plus, you might get install blocks as pictured, luckily I did. Those install blocks are inadequate since they end up putting the X gantry far too high on the top 4020 channel. Drop the rails to the lower channel and add these. Why? As the gantry moves along the Y axis the belts get tighter with the higher mounting point, your corners will get horrible ringing. You want the belts as flat as possible. Less angle.<br><br>These blocks solve that by keeping the profile low. They are marked 13 for 13mm height. 14mm was tested but 13mm interferes with nothing. I had to change my cable chain termination to fit these perfect, but that was needing a remix anyway.</p>