Ender 5 Plus Large Spool Holder Extension Bracket

prusaprinters

<p>This contains two lengths of bracket for moving the standard spool holder bracket 25 mm or 50 mm to the rear of the Ender 5 Plus. This allows the use of the large replacement spool holders such as the design this is a partial-remix of.</p><p>The newly created objects are the brackets.</p><p>A replacement for the 'Creality Bolt' with a 1.5 mm slot present (<i>note: widened to 2 mm for “v2”</i>) to orient the bolt at 90 degrees to normal (remix from '<a href="https://www.thingiverse.com/thing:3020026">https://www.thingiverse.com/thing:3020026</a>'), and a modified 98 mm long spool holder that may be printed vertically (remix from '<a href="https://www.thingiverse.com/thing:3209211">https://www.thingiverse.com/thing:3209211</a>') is included.</p><p>Rebuilt using the 'things' as mentioned as remixes, and from scratch for the brackets, in RS DesignSpark Mechanical. Source files included for modifications.</p><p>Photos show 50 mm bracket. Note clearance is very large. If you don't require such a large clearance, then use the 25 mm bracket. (Or customise from the DesignSpark Mechanical files).</p><p>Update 2022-06-24: My print broke under long-term load (refer to last photo), with a 1 kg spool held for several months. I had used only two walls, which was insufficient. Suggestion to print using four wallls.</p><p><i>Update 2022-09-26: The new print using four walls also broke unde load. &nbsp;I have redesigned the parts, which are now “v2”. &nbsp;Unless you want to save material then I suggest printing a new version. The ‘Creality Bolt’ design has also been modified with a wider slot, as “v2”.</i></p><h3>Print Settings</h3><p><strong>Rafts:</strong></p><p>Doesn't Matter</p><p><strong>Supports:&nbsp;</strong></p><p>No</p><p><strong>Resolution:</strong></p><p>0.2 mm</p><p><strong>Infill:&nbsp;</strong></p><p>20% gyroid for bracket</p><p><strong>Notes:</strong></p><p>Suggest to use four walls (1.6 mm thickness, with 0.4 mm nozzle). Infill of 20% should be sufficient with four walls.</p><p>(Two wall, 40% gyroid infill print broke under load after several months.)</p><p>&nbsp;</p><p>&nbsp;</p><p>Category: 3D Printer Parts</p>