Ender 5 Plus Hemera Mount with BLTouch MK2

thingiverse

#### Mark II XS For a request, I made an XS compatible version of the MK2 labelled MK2_XS. It's exactly the same as the MK2 version but has two additional mounting points spaced to match with the XS stepper motor mounts. Should work the same and maintain clearances. #### Mark II Alright, so the original version bugged me because the entire Hemera assembly sat so low on the carriage that it caused interference with the Ender 5 Plus bed guide rod mounting brackets (the four silver T-shape ones on each inside corner). This meant that the fan duct in the original had to be configured to sit higher than optimal, and there was a risk of your BL Touch probe catching on the brackets. This meant you would suffer a reduced print area to account for a safe print space, in my case 324x340. Not major, but there must be a better way. Mark II to the rescue! The entire Hemera assembly has been raised several millimetres and the BL Touch has been relocated to the right side of the Hemera. EVERYTHING now clears the guide rod supports. My print area has returned to 350x340. The last 10mm of Y axis space may be recoverable by relocating the Y end stop switch, but I have yet to try this. Due to the Mark II removing access to one of the three carriage / wheel bolts, I have designed this version to self-contain the nuts on the Hemera-side of the mount. You should be able to press them into place and them just bolt in from the rear of the bracket! In my opinion this is an easier assembly anyway! ##### Mark II Offsets X - 60.5 mm Y - 0 mm Z - Should be calibrated, as differences in print settings and materials may result in slightly different measurements. #### Original I created this remix to add in a BLTouch mount calibrated for a Revo Hemera. I'm currently using the Hemera V6/Colcano Part Cooling Duct by Hangtight: https://www.thingiverse.com/thing:4042492 With my modified mount for additional Z axis adjustment to account for the Revo nozzle being lower than a V6 style: https://www.thingiverse.com/thing:5788672 ##### Offsets: X - 43.545 mm Z - Should be calibrated, as differences in print settings and materials may result in slightly different measurements.