Ender 5 Plus Hemera Mount and Linear Rails

thingiverse

UPDATE 03/28/2020: Added a modified Hemera front belt clip mount, which includes some cleanup and a different cable support. UPDATE 02/27/2020: A new hemera x stop has been added, providing better adjustment and stability for the x stop with the modified Hemera mounts. UPDATE 02/26/2020: A new version of the Front belt clip Hemera LR MOUNT has been added. This mount features belt clips on the front instead of the rear, resulting in a better angle for printed belt clips to avoid rubbing against the extrusion. The clips can be adjusted until you achieve the perfect fit. Rear belt clip video installed on an Ender 5 Plus: https://www.youtube.com/watch?v=5KwS48xxb3w Front belt clip video installed on an Ender 5: https://www.youtube.com/watch?v=1vp6IQ8vMQI UPDATE 02/24/2020: The Hemera Linear Rail mount has been replaced with a more improved version. An Experimental 20mm Cooling fan Hemeres linear rail mount has been added, allowing for the use of a 20mm cooling fan. This was a request and has not been tested or printed. All parts required to modify an Ender 5 Plus to Direct Drive Hemera with linear rails are now available. The mount for the Hemera should be printed using a very strong plastic. Carbon fiber PLA with 6 walls, 6 top and bottom layers, and 20% infill is recommended. Supports will be needed. By changing the drive system to linear rails, new X and Y stops are necessary. The old bowden tube can be used to support the wiring going to the Hemera on the hotend and the rear of the printer. Print one of all parts except for 2 - Y Axis Linear Rail Mount.stl. These should also be printed using carbon fiber or other very strong filament. Hardware: 3x 400 mm Linear Rail Guide with MGN12H can be purchased from Banggood or Amazon. 60+ M3 Slide in T Nuts (https://amzn.to/2VKg8GK) OR M3 Hammer Head T Nuts (https://amzn.to/2VHfuK4) 60+ M3x8mm Screws (https://amzn.to/2JO2zUD) 8 x M5x 15 mm Screws M5 x 12mm should also work 8 x M5 x 0.8mm 304 Stainless Steel Nylon Inserted Hex Lock Nuts can be used instead of the originals 12 M3 14- 16 mm bolts to attach the printed mounts to the linear rails Various M3 bolts and T-nuts to attach new stops This mod is part of a series of mods, many of which depend on each other. The list of all things is available at: https://www.thingiverse.com/thing:4162889 Videos showcasing the complete set of mods working together are available at: Overview of the complete set of mods: https://www.youtube.com/watch?v=j9fmqRUXmLE Ender 5 Plus startup: https://www.youtube.com/watch?v=m9vQS9mssKU Ender 5 printing: https://www.youtube.com/watch?v=TcD8vtofsU0