Ender 5 plus direct drive bmg mount for mosquito and bltouch

thingiverse

This is a remix of the BMG mount made by Oaklandishh with a few changes made: - hotend fan adaptor to suit larger style fan - 2 types, one that is bent up at the front to clear the front extrusion on the ender 5 plus, or one that would most likely be fine on a cr-10 etc.. - part cooling fan redesigned to be shorter to prevent dragging on print and also added ducting to other side of hotend so part cooling is more efficient - added mount for bl touch to fit in hole that was already present. #you may need to heat the fan shroud with a lighter slightly and bend it a little to get it to clear the thermistor but not by much.also you will need to add custom supports to the part cooling fan shroud overhang. everything else should fit and function fine. i have also uploaded my firmware.bin to suit skr1.3 e3 board and also touchscreen firmware.bin and customized icons to suit. check the btt github page https://github.com/bigtreetech for instructions on how to flash firmware to board and screen if you are unsure.