Ender 5+ Direct Drive Filament Guide with Detection

thingiverse

Nothing could be easier to print! No supports are required and the parts are already oriented. For the assembly, I used the original detector's screws of the Ender 5. Be careful, the holes are deliberately narrow, so you have to use an M3 tap, otherwise you have to pass once an original screw "in force" to create the tapping allowing the whole to hold correctly. I then used a Ø22 ball bearing and a M4x20 countersunk screw and nut to assemble the two parts. The whole thing is then easily mounted on the original support.