Ender 5/5 Pro HMG5 Base & Microswiss DD Adapter Combo

thingiverse

12/16/2020 Update; So I printed it and there are still things that are off, the MicroSwiss Hotend don't fit unless you modify the back some... I clipped out the bottom bar going under the hot end then had to cut out the part that is touching the face of the hotend slightly!!! I like the tight/compactness of the design so I'm working on V1.3 next, stay tuned!!! Mods to the fan ducts are needed; on the duct, clip the rear most 2 screw holes off of the brace!!! 12/12/2020 Update; I've revised it will print and share after I verify it resolves some of my previous mistakes!!! See first photo!!! Mods will be needed for the fan ducts which ever you choose I'll share the ones I modify!!! So I made and used the Base #4 from hero me gen 5 and the Microswiss Direct Drive gantry adapter and it made the fan duct too far forward or, with the microswiss hot end spacer brought the hot end out too far so I combined and welded the too at a decent space so the spacer wasn't needed and the ducts are placed on the sides of the E-tip... Compacts it some too!!! Used: Hero Me Gen 5 Base #4 from here: https://www.thingiverse.com/thing:3182917 Microswiss Direct Drive Gantry Adapter Here: https://www.thingiverse.com/thing:4604328