Ender 3 X-Axis Linear Rail Mod

thingiverse

I used a Thingyverse ABS mount It FAILED after a week. So to start off I used the old aluminum plate and made a spacer out of aluminum. But you should be able to use a ABS one. It will be off to the side of the actual mount. The new plate with the slots gets mated to the bottom of the original plate to line up the belts with the channel. It is held on with (2) 3 mm screws and nuts. (UPDATE) 12/27/2021 I had to change the spacer plate. It was still too far away from the channel groove. To help with strength I made it a bit bigger. To use it you will have to trim 6 mm off of the Plate where the grooves are.