Ender 3 Webcam extrusion mount and hinge

prusaprinters

I didn't have any bolts to attach aallensd's wonderful webcam mount (https://www.thingiverse.com/thing:3147743) to my Neptune 2s (and I'm cheap). I've used the following Things: aallendsd's webcam base - https://www.thingiverse.com/thing:3147743 Estep's End Cap for Aluminum Extrusion 40 x 40 mm Geeetech A10 - https://www.thingiverse.com/thing:4109762 Nightingale33's End Clip With extended sides - https://www.thingiverse.com/thing:5166163 (this spawned the idea.) I then used: Failrunner's Webcam mount pin - https://www.thingiverse.com/thing:4946764 - to attach the hinge to... metalmike187's Shorter Webcam Arm - https://www.thingiverse.com/thing:4874285 - and... Jimbo123D's Webcam Mounting Screw 1/4" - 20 - https://www.thingiverse.com/thing:3540517 - to attach the webcam to the arm. It's a snug fit and requires a bit of force to get it in place but the end result is quite a stable webcam when printing. This is my first time using Fusion 360 and I'm quite pleased with how it turned out. Print Settings Printer: Elegoo Neptune 2s Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 0% Filament: Geeetech PLA Black Notes: The extrusion clips are ~18mm in length. There is a bolt that goes through the right side of the extrusion on the Neptune 2s so this governed the length. You'd obviously have to check your extrusion channel for any obstacles before printing your own. Category: 3D Printing