Ender 3 V2 PSU Bottom REMIX

thingiverse

Ender 3 V2 Power Supply Bottom with two 40x10 fans and a Spot to mount a Buck Converter. I regret not flipping the fan location to where the original was because i could of made it so two 40x20 fans would work with all the space they give you. If you choose to tinker it feel free to do so. I remixed the piece into this one which holds two 40x10 fans as well as a Buck converter Next to it. I chose this due to the lack of space i had with bigger fans. I also included pieces you can screw into so your buck converter stays in place. Im using 1/2" #4 Philips Flat head Everbuilt screws From home depot. Simply run your fans together in parallel and run them directly to psu board that has a 12V fanplug. Im using noctua NF-A4x10 which is how i measured my holes. Placement is just fine for me. Im printing this with basic PLA+. im using a tree support touching buildplate with a 55 degree branch angle. I also use a Brim build plate to keep it from popping off. I use the magigoo glue and it Seems to be printing perfectly with these setting. Temps are 210 at the tip and 60 bed temp with PLA+ !!!PS The buck converter is not for the fans in the power supply housing. It is a place to put it so you can wire a seperate 12v fan At the head or at the mobo if you choose to do so.