Ender 3 V2 - Palette 3 - Filament Tube Clip with Fitting - Improved

thingiverse

Ender 3 V2 + Palette 3 = Tube Clip =========================== Make Palette work with Ender 3 V2! Description --------------- This is an accessory that allows you to clip the Palette 3's filament tube to the stock Ender 3 V2 extruder using a regular Bowden tube fitting. How to print ---------------- * Infill 100% * No supports How to install ------------------ 1. Unscrew the lead screw nut from the X-axis carriage 2. Place the tube clip on the two screw holes 3. Screw the left screw in first (as seen from the tube fitting side) 4. adjust the angle so the filament flows in a straight line from the tube fitting to the extruder hole 5. Fix the second screw in the slot to lock down the angle 6. Screw a regular Bowden tube fitting into the tube clip (see pictures for reference) 7. Done. See below for instructions on how to find out your new loading offset How to find new loading offset ------------------------------------ 1. Preheat your nozzle 2. Insert filament through the tube fitting that is screwed into the tube clip into your extruder 3. Advance filament into the nozzle and extrude 30-40mm 4. Cut the filament at the green line (see pictures) 5. Let your hotend cool to around 160-170°C and then quickly pull the filament out of the extruder 6. Measure the length of filament you pulled out. 7. [New loading offset] = [length of filament] + 6mm