Ender 3 v2 Manual Bed Levelling Assistant

thingiverse

To use the GCODE file, simply download it and put it on your printer's micro SD card. Then put the SD card in your printer and "print" the GCODE file. You should at no point use your slicer software! Please see the video on how to use these files and for an explanation as to why this method is better than manually moving the nozzle to each corner here: https://youtu.be/mfVTD8d-a4o There are two GCODE "thing" files - the "NRML" (normal) one will go to each of the four corners of your bed, whereas the "CNTR" (centre) one will go to each of the four corners and then go to the middle of the bed as well. I recommend the normal one, as the middle point essentially only indicates if your bed is warped. If all your corners are perfectly level, but the middle one is not, your bed is probably warped. Don't use these GCODE files on anything else than the Ender 3 V2. Even though it might (and even should) work on other printers with similar build volume, I haven't tested it on any other printer. Please ignore the STL file, Thingiverse won't let me upload my files without it. Credit where credit is due: these GCODE files are based on CHEP's GCODE files which you can find here: https://www.thingiverse.com/thing:3235018, his video: https://www.youtube.com/watch?v=_EfWVUJjBdA, his website: https://www.chepclub.com/bed-level.html Changes to his GCODE: - the code loops for 10 times - the points where it goes down is more accurately aligned with the screws - it's even faster - it's got a different order