Ender 3 V2 - Hotend Fan Cover / Housing

prusaprinters

<p>This is a replacement for the stock hotend fan case / housing / cover since they break alot on the front fan screws.</p><p>I've made this to print out of a single part with no supports but still keep the design of the stock one. The fans inside + the radial fan airflow piece can still be used in this cover as well.</p><p>Take care about the 2 small pins on the side to not break them since they are used to align the radial fan airflow piece.</p><p>I recommend to print in PETG and befor the first mount to drill out the boreholes for the screws to prevent cracking of them (some possible filament left in there from printing).</p><p>Pictures show a printed version with 0.6mm nozzle and 0.4mm height for prototype testing. If you print with 0.4mm nozzle and 0.2mm height you should get out a more smoother part. Infil 20% ZigZag</p><p>If you like my design, you can send me a tip above to pay off the coffee while i made this.</p>