Ender 3 V2 Calibration Testing
thingiverse
The attached files are my personal 3D printer calibration tests that I use to calibrate my <strong>Ender 3 V2</strong>. I couldn't find any relevant test files that did the calibration steps that I wanted when I first started printing so I used some of the CHEP's original g-code and modified the files. Specifically CHEP's original (CHEP_bed_level.gcode) bed level g-code does not pause on the Ender 3 V2. I have listed the links to CHEP's original files and descriptions, in order, for each file below. <u>V2_movement_test.gcode</u> This file moves the Z-axis, X-axis, and Y-axis on the Ender 3 V2. I use this to make sure there is no binding, grinding, or hang ups when moving the extruder or bed on my V2. <u>V2_bed_level.gcode</u> This file is the modified version of CHEP's bed level g-code and it moves the nozzle to all four corners of the print bed. I corrected the Z-axis pause points to be directly over the adjustment screws and also fixed the pauses so the Ender 3 V2 actually stops at each point. CHEP's original code doesn't line up on the V2 threads and just keeps moving without any pauses as its specific to the Ender 3 printer only. <u>CHEP_bed_level_print.gcode</u> This file is CHEP's original bed level print and prints out concentric squares to test that your prints stick to the bed platform appropriately. CHEP has a video on how "tight" they should be stuck to the bed and can be found on his page. <u>CHEPCube.gcode</u> This file is my final calibration print and I use it as a benchmark to make sure my printer is calibrated properly. If this 20x20x20mm cube comes out with anything other than +/- 0.1mm in any direction then that tells me I need to recalibrate my machine or adjust one of my axis points. I hope you find these calibration steps helpful when calibrating your Ender 3 V2. CHEP Page: https://www.thingiverse.com/elproducts/designs CHEP Bed Level: https://www.thingiverse.com/thing:3235018 CHEP Cube: https://www.thingiverse.com/thing:3189377 Other Calibration and Testing for Ender V2: https://www.https://www.thingiverse.com/thing:5382503
With this file you will be able to print Ender 3 V2 Calibration Testing with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Ender 3 V2 Calibration Testing.