Ender 3 Snips Holder

prusaprinters

<p>This is my minimalist version of an Ender 3 Tool holder for the snips (aka filament cutters) — the tool I use most with my 3D printer. It holds the cutters handle-side up so they are easy to grab and close at hand. This uses the standard rail insert and is a quick, easy print.</p> <p>This solo tool holder design was inspired by multi-tool holders like <a href="https://www.thingiverse.com/thing:4669250">https://www.thingiverse.com/thing:4669250</a> and others that fit on the top rail, however, I designed it from scratch in Rhino 3D.</p> <p>Why did I design this?</p> <p>I keep my 3D printer tools in a drawer unit but found it inconvenient for the snips. I like a streamlined look for my printer and this minimalist design is functional and low-profile. I re-printed it in black so it integrates with the frame.</p> <p>Please post a pic if you make it!</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3 Pro</p></div> <p><strong>Resolution:</strong></p> <p>.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>15%</p></div> <p><strong>Filament:</strong> Inland PLA Red or Black</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>I use Prusa slicer. This was designed in inches.</p> Print with the top of the holder on the bed as shown in the pictures with "Support on build plate only." <p>15% infill is sufficient.</p> <h3>Post-Printing</h3> <p>This snip holder is a perfect fit for my Ender 3 Pro (2022). It is designed to fit snugly on the rail so make sure you sand any burrs left from the support material where it slides onto the rail.</p> </div></p></p> Category: 3D Printer Accessories