Ender 3 S1 Pro Bed Cable Chain Relief.

prusaprinters

This model was built off the pre-existing design from @Bananenminister.This is my first design so I may do tweaks in the future if problems persist but I have prototyped several models with PLA, PLA+ and PETG. and I would strongly suggest these to be printed in PETG since PLA variants may warp from heat over time.These are the quantites and parts you will need from @Bananenminister's files : 16-Clips 15-Chain links1- Ground Plate1-Hook (to secure ground plate) My Clamp in addition will require:1-TOP Bed Cable Clamp1-BOTTOM Bed Cable Clamp.2-M3 Nuts (Pressed into recessed Bottom Bed Cable Clamp housing)2- M3x10(or longer) Cap Screw Bolts.Printed at:3 walls20% InfillPrinted with Supports. I have designed this bed cable clamp since there has been no full cable chain designs made for SPECIFICALLY the Creality Ender 3 S1 Pro since the cable is angled from the base of the printer to the bed plate.  The Clamp will provide stress relief to the cable connection, while @Bananenminister's design will protect the bottom of the cable going to the mainboard.Please enjoy printing and I hope I can help save you the headache that many have dealt with worn out cables.