Ender 3 Pro - Shelf

thingiverse

<h2>Accessory / Addon for the Creality - Ender 3 Pro</h2> To have all tools, components, some filament, an adhesive spray and everything I need around my printer, I designed a shelf that fits under my Ender 3 Pro Printer. The Shelf The shelf is lasercut out of 4mm MDF, after assembling the body and the three drawers, I sanded everything to give it a nicer look than with the burned lasercut sides. Mount the handles to the drawers with the M3x10mm bolts. Now you can put your printer on top and fill up your new storage module. If you also often carry around your printer as I do, you can mount the shelf to the baseframe of the printer using - Spacer + Tnut + M3 nuts + M3x20mm countersunk bolts. <h2>Materials / Prints:</h2> <ul> <li>One 4mm MDF sheet, 600x1200mm</li> <li>Eight M3 x 20mm countersunk bolts</li> <li>Eight M3 nuts</li> <li>Four M3 x 10mm countersunk bolts</li> <li>Four spacer.STL</li> <li>Two handle_drawer_small.STL</li> <li>One handle_drawer_big.STL</li> <li>Eight T-nut_M3_x1.STL</li> </ul> <h2>Facts:</h2> <ul> <li>The maximum dimension of fitting filament spools: ø200x75mm (I use 3D Jake - ecoPLA)</li> <li>A slot for the adhesive spray: 200x68x75mm (I use Adheasy Spray)</li> <li>Two smaller drawers on the side for maintenance tools (Hex keys, screwdrivers,...)</li> <li>A bigger drawer in the front for daily tools (pliers, spatula,...) or finished prints to store</li> <li>One empty slot on the rear-right to customize</li> </ul>