Ender 3 pro satsana orbiter 5015

thingiverse

This is my remix of the famous and wonderful satsana fanduct. I made this with a backplate that mounts to the original x-carriage plate of the ender 3 pro. All the holes are made to fit melt nuts so the m3 screws have proper grip (10 in total). I used m3x10 screw to assemble it. NOTE: This will bring your hotend +/- 7mm further to the front. The backplate is mounted to the x-carriage using 2 screw in the original fan shroud holes and you will need 2 longer M3 screws for the hotend. This is bolted to the x-carriage plate fixing the mounting plate in between. The fan shroud itself is mounted to the plate using 2 screws. One on the left and one behind the 5015 blower. This fixes the issue of the original satsana getting a bit loose on the right side. The inside of the shroud is made a little bit bigger to fit a dragonfly hotend. Haven't tested it yet because I still haven't bought one. (edit 25-apr-2022: Use the "satsana dragonlfy" shroud. The nozzles on this one have been lowered a bit) This is still a work-in-progress but it works as is. I'm currently printing 60-80mm/s pla with this and it holds up great. If there are any comments please let me know :) Update 25-04-2022: It's been a while since I worked in this project. I've been busy with other stuff. I do have a couple of new files I made some minor changes to fit my setup. - Dragonfly hotend (I recommend to print the "dragonfly satsana" as wel. I noticed the dragonfly sits a tiny bit lower than the original hotend so i dropped the nozzles a bit.) - BLtouch (the one in the pictures is from Trianglelab but I designed it for an original BLtouch.) Sadly I haven't had time to design a dual 5015 fan one and I don't know when I have the time to do so. Since the original satsana is open source I have uploaded STEP files so that you guys can keep on tinkering to make it fit your needs.