Ender 3 Pro MKS GenV/ SKR V1.3 & Raspberry pi Sidebox

thingiverse

**IMPORTANT NOTICE: THIS FILE WILL BE UPDATED MULTIPLE TIMES OVER THE NEXT FEW DAYS. I PLAN TO COMPLETE IT BY 5/20/19, SO IF YOU DOWNLOAD IT NOW, PLEASE HOLD OFF ON PRINTING ANYTHING AND CHECK BACK OFTEN. I'LL KEEP POSTING PICTURES OF WHAT I PRINT AND LET YOU KNOW IF IT'S OK TO PRINT, SO YOU DON'T WASTE YOUR TIME AND FILAMENT.** **IF YOU WANT TO PRINT THE ORIGINALS, THEY'RE PERFECTLY FINE AND WORK AS DESCRIBED** * UPDATE - 5/18 - 2am: I CHANGED THE LCD BASE BECAUSE I REALIZED I HAD ELIMINATED THE SUPPORTS FOR ATTACHING IT TO THE FRAME. LOL... I ALSO ADDED THE ENDER LOGO AND THE ENDER DRAGON TO BE PRINTED OUT AND ATTACHED TO THE LCD DISPLAY. * UPDATE - 5/18 - 9am: THE BASE FOR THE LCD DISPLAY IS PRINTED, AND PICTURES ARE UP. I'M USING A 10MM FAN TO SHOW THE FIT, WHILE A 20MM FAN CAN BE SEEN ON MY TEMPORARY BASE PRINTED IN WHITE MARBLE PLA. * UPDATE - 5/18 - 10:30am: OK, THE LOGOS ARE PRINTABLE WITH OR WITHOUT A RAFT. I SUGGEST PRINTING THEM ON A RAFT IF YOU SEE THAT THE WHISKERS ARE NOT PROTRUDING FROM THE BASE PROPERLY. ALL ORIGINAL FILES ARE INCLUDED IN THE REMIX FOR DOWNLOAD... IF YOU WANT TO DOWNLOAD MY REMIX, JUST DOWNLOAD THE ONES LABELED ENDER 3 PRO. * UPDATE - 5/17/2019: I UPDATED THE FILE WITH SOME CHANGES. I WENT AHEAD AND MODIFIED THE LCD DISPLAY TO FIT A 40MM FAN INSTEAD OF THE ONE THAT WAS ORIGINALLY USED, WHICH LOOKS TO BE A 20, OR 30MM FAN. I USE A NOCTUA 40MM X 40MM X 20MM FAN, WHICH FITS PERFECTLY FINE, SO A 10MM FAN WOULD WORK ALSO. THERE ARE TWO VERSIONS OF MY DESIGN: ONE KEEPING THE FAN LOCATED IN THE SAME SPOT ON THE SIDE NEXT TO THE HEAT BED, AND THE OTHER WITH THOSE AREAS BLOCKED OFF AND THE FAN LOCATED IN THE REAR. THIS IS BEST FOR THOSE WHO DO NOT WANT TO ATTACH THE MAIN BOARD TO THE LCD BOX. I ALSO ADDED A HOLE ON TOP OF THE DISPLAY TO BE ABLE TO DROP IN MY DISPLAY'S PEN. I HAVE ALSO ADDED A PEN HOLDER THAT CAN BE PRINTED OUT AND ATTACHED ANYWHERE. THE ORIGINAL DESIGN USES A DIFFERENT MOUNT FOR THE SCREEN, WHICH COMES WITH 4 MOUNTS BUILT-IN WHILE MINE CAME WITH NOTHING. I DECIDED TO TRY AND ADD A FAN MOUNT FOR THE ULTIMATE IN COOLING OF THE RASPBERRY PI. LOOK AT ALL PICTURES FOR BETTER DESCRIPTIONS. HEY EVERYONE, I REALLY LIKED THE ORIGINAL DESIGN BUT I FELT IT WAS MISSING A FEW THINGS, AND ALSO HAD A FEW EXTRA THINGS I DIDN'T REALLY CARE FOR. ALL ORIGINAL FILES ARE INCLUDED IN THE REMIX FOR DOWNLOAD... IF YOU WANT TO DOWNLOAD MY REMIX, JUST DOWNLOAD THE ONES LABELED ENDER 3 PRO. **SIDEBOX FOR MKS GEN V1.4 + RASPBERRY PI WITH 5" DISPLAY FOR USAGE TOGETHER OR EACH SINGLE, ATTACHABLE TO THE ENDER 3** HOUSING FOR PI IS FOLDABLE AND HAS A SLOT FOR THE PI-CAMERA-CABLE AT THE RIGHT PLACE FOR MOUNTING THE CAM AT THE X-AXIS. IT HAS ROOM FOR A 4 CHANNEL RELAY BOARD AND TWO STEP-DOWN-MODULES. BOM OF ALL PARTS IN ODS. **BOTH BOXES HAVE 4MM ROOM TO GROUND. THIS IS FOR STICKING SOME RUBBER FEET UNDER IT.** SOME LIKE THESE: https://www.amazon.com/HAWORTHS-Bumpers-Self-adhesive-Bumpons-Clear-Cylindrical/dp/B06XWTRC66/ref=sr_1_2?keywords=4mm+rubber+feet&qid=1558145462&s=gateway&sr=8-2 **IF YOU HAVE ANY QUESTIONS OR NEED HELP, PLEASE LET ME KNOW. I'LL BE HAPPY TO ASSIST YOU.** I HOPE YOU ENJOY THIS REMIX!