Ender 3 Pro Glass Bed Stay and Handle

thingiverse

I combined my Ender 3 Pro Glass Bed Stay https://www.thingiverse.com/thing:4606716 with my CR-6 SE Bed Handle https://www.thingiverse.com/thing:4581329 to create something still pretty simple to print and attach. If you have the stock 8mm springs it may just clip on without requiring much force at all. If you have 10mm springs as I do it will probably require completely unscrewing the adjustment wheels to give enough play in the springs to pop this in place. Afterwards the adjustment wheels just go back on as normal, however it may be challenging to access them as the bed handle blocks a good portion of the front access of the wheels. If you have auto bed leveling this shouldn't matter much, otherwise adjusting bed level on the fly may be a bit more difficult with this handle. Once in place, the only way to remove the glass bed would be to pull it up from the rear end of the carriage. This also works in tandem with the aforementioned bed stay to keep the rear in place. On the left side of the model, I shortened the overhang of the bed stay portion as when I was printing very large prints, sometimes the BLTouch shield(https://www.thingiverse.com/thing:3419174) would catch on the bed stay itself.