Ender 3 Pro Front Cover

thingiverse

This is the cover for the front of the Ender 3 Pro. This cover is inspired by the new ender 3 s1. I use the 3mf file, for those of you who have never used this file, the method is the same as the stl file, you only need to drag it to the slicer. When inserted, the object's location may be outside the specified area, you just need to move it to the center by right-clicking and then center selected. For correct placement I have included in the picture. some objects may appear a notification that the object is an error, but that's not a problem, you can still click slice and preview. if you want to modify or remix this, I include the STP file so you can change it, the corner of the object in the STP file is not filleted to make the modification process easier. feel free to give me suggestions and questions. What you need to prepare: 2x M5x10 screws 2x M5 nuts 4x M4x12 screws 2x M4 T-Nuts Printing process: no need to use support, except for Outer Drawer use support on the side only. all objects have a tolerance of 0.4 mm Installation process: 1. Remove the LCD and Y axis belt tensioner. 2. Attach the part (Outer Drawer) to the middle frame. then reinstall the Y axis belt tensioner. 3. Install the part (LCD Mount) on the outside of the frame, there are two small holes on the back, use M4x12 screws and M4 Tnuts to prevent the bracket from shifting. there is a hexagon-shaped hole on the back, insert the M5 nut and push it to the bottom. then attach the LCD from the front using the prepared M5x10 screw. 4. Install (Left Cover) using the original screw on the left. 5. Install (Right Cover) using the original screw on the left. make sure (LCD Mount) and (Outer Drawer) are installed first. 6. On the back (Central Cover) and front (Inner Drawer) there are holes. serves to unite the two parts using an M4x12 screw. the hole in the (Inner Drawer) is made longer so you can adjust it. If there are deficiencies or questions please write in the comments column, Thank you. If you like it I will be very happy, I plan to make cover accessories with various themes, so that the 3D printer can adapt to the taste of the owner.