Ender 3 nozzle cleaner holder

prusaprinters

A simple, quick to print holder for the cleaning needle of the Creality Ender 3, designed to fit on the top part of the printer.Versions:default version with or without my logoreverse version with or without my logo (can be printed without support)Printing/assembly instructions:Any infill and layer hight works, it serves next to no structural purpose. Support is needed for the default. I would recommend printing that (B) on its side and the reverse version on its bottom (A). (see picture)To assamble, cut down some foam (I used the one provided with the printer) to an around 9x9x30mm piece and insert it into the cutout on the holder. Use glue when necessary to stick the foam inside.Take the two screws out on one end of the top beam, so you can slide the holder into it. For the reverse version you need to take all 4 screws out, to disassamble the entire top part and slide the holder in the bottom part on the beam.