Ender 3 Neo BTT Pi v1.2

prusaprinters

I really liked That_Jamie_S_Guy's and kaloth's pi cases, but i couldn't get it to fit on my Neo, I also wanted to mount a BTT Pi in there. So I took heavily from his case and built my own. There is a little cutout on the right for an SD Card extension. I will add more pictures as I continue this project. I've only finished the case. The PI is secured to the case with a couple of M2.5x4 screws. The lid is made for a 4010 Fan, this will be the trickiest part of the case, so I'd suggest making some extension wires to connect the fan if they're too short. I will add pictures later as I continue. There's also a small slit on the bottom of the case, I put that there to hopefully fit an SPI cable for the TFT35 SPI, I will use this case for that, https://www.thingiverse.com/thing:6478665USB Cable - This is what I will use to connect the PI to the mainboard.https://www.amazon.com/dp/B0BXY66P5R?ref=ppx_yo2ov_dt_b_product_details&th=1SD Card extension - https://www.amazon.com/gp/product/B07WWVBK8V/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 You will need supports, I printed at .3 but you can print at whatever you want. The only supports that suck are on the fan hole, just poke them through and pull them out, pretty easy. I added some pictures of it as I install it. I would definitely change some things looking at it again.After installing the Pi, slide about an inch in and wire it up. put the lid on, then the back. Finally, slide it the rest of the way in.