Ender 3 Max. Meanwell PSU Tool holder/s (dual z screw users)

thingiverse

Ender 3 Max meanwell psu tools holder. 2nd attempt at uploading this newly revised set. This is for anyone who has fitted dual Z screws and moved the meanwell PSU off the gantry leaving a little space to play with. I discovered that there are 2 different shell sizes for the PSu with a difference of 1.5mm to 2mm difference. These are sized for the larger variant but will still work just fine on the smaller too. Either by adding a small wedge or a drop of superglue to keep things in place. Gravity does most of the work anyway so even if you have the thinner version, the tool caddy wont be going anywhere. I added a small sliver 'test' piece for anyone wishing to check the size before printing the full sized items. There are now only 3 options in the set. Version one is the deep version. Designed so that no tools will ever be able to come into contact with the metal shell of the PSU (for those who worry about such things). This is also the hardest to print. (Print any of these holders upside down with tree supports for the best results). Version one holds nearly all the usual tools that come with an ender printer. Depending on clearance between z lead screw and PSU you may only be able to mount this in one direction (the direction it was designed for) with the snips at the furthest point away from the gantry. The other 2 versions (V2 and 2a) are both shallower designs. V2 has some extra tool holes but no snips mount making it the quickest and easiest print here with the cleanest look. This lack of snips support does mean you can mount it either way on the psu without any clearance issues. For printing:- upside down with Tree supports.