Ender 3 LED light bar mount

prusaprinters

The original brackets by RogueGeek had more of an angle then I wanted. Great basis for this design. I decided I wanted 2 lights, up as high as possible in case of tall prints. I wanted to have 2 brackets that would hold both the lights. Wired them together, added a 2amp fuse and wired directly to the power supply. I have a file for a single light (print 2 brackets) The other file is for the double (print 2 brackets) Brackets slide around a bit, might vary depending on how everyones printers are dialed... These were the lights I used for this project https://www.amazon.com/dp/B08B5T4STX?psc=1&ref=ppx_yo2ov_dt_b_product_details And the parts I ordered to complete this: https://www.amazon.com/dp/B09JW4KPKW?psc=1&ref=ppx_yo2ov_dt_b_product_details https://www.amazon.com/dp/B07MBWKX53?psc=1&ref=ppx_yo2ov_dt_b_product_details https://www.amazon.com/dp/B07S33YTKY?psc=1&ref=ppx_yo2ov_dt_b_product_details I am no master designer, this may not be perfect, and if I make any changes down the road, I will update here! Feedback appreciated, I hope you guys find it useful. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 25 Filament: Hatchbox PLA Red Notes: Print on its side, 2 double brackets will fit on ender 3 build plate. I always use rafts just because of the warped bed. How I Designed This =================== Used measurements from original design, adapted to fit my lights. Category: 3D Printer Accessories