Ender 3 LCD flush mount enclosure

prusaprinters

<p>I made this to mount my LCD screen to the front of my Ikea Lack enclosure. I am mounting the raspberry pi to the back of the enclosure, so i did not need extra space under the LCD screen. This cover is shorter than most so that you can screw the LCD screen to the front of the enclosure using the existing mounting holes.(see pictures) This makes it a little lower profile, and cleaner looking.</p><p>I liked the design of eoyilmaz's enclosure, so I used most of his work, all I did was some 3d cut and paste. One version is like his original with an opening for the 3 ports on the screen, the other is completely closed off. I printed the closed version so i can drill a hole in the tabletop and run my ribbon cable on the inside.</p><p>&nbsp;</p><p>Original design: <a href="https://www.thingiverse.com/thing:4586351">https://www.thingiverse.com/thing:4586351</a></p><p>I was able to use the factory screws that hold the LCD screen to the metal bracket.</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Creality</p><p><strong>Printer:&nbsp;</strong></p><p>Ender 3 Pro</p><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports:&nbsp;</strong></p><p>Yes</p><p><strong>Resolution:</strong></p><p>.32</p><p><strong>Infill:&nbsp;</strong></p><p>doesnt matter</p><p><strong>Notes:</strong></p><p>You should turn supports on, but the only place it needs it is the front mounting ears. I had to adjust the support overhang angle to 60% to get it to work right in cura. It did fill in the slots on the side, but only near the tabs, and it was relatively east to cut out with an exato knife.</p><p>I also suggest a brim, as there is little bed contact area.</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>Category: 3D Printer Parts</p>