Ender 3 Front X-Gantry Cable Support
thingiverse
<b>Ender 3 Front X-Gantry Cable Support for Direct Drive front cable management to the left of the print head</b> I wanted my Ender 3 Direct Drive cabling secured to the front left of the printer and created two mounts: This one &: Direct Drive Extruder Mounted Cable Support - https://www.thingiverse.com/thing:4867538 <b>Printing Settings</b> Print without supports. Has nicer curved edged with 0.16 but prints just fine with 0.2. <b>Parts needed:</b> 1 x M4 bolt (Can be anywhere from 10mm to 16mm long) 2 x 4 or 5 inch cable ties <b>Directions:</b> Remove Housing from Left side of X-Gantry Position Brace on inside and use a M4 Bolt to connect both pieces in place Re-attach the Housing (There is a gap so the 2 original screws on left side can still be put through. They are not suppose to affix to part. (See 3rd picture which shows the two pieces bolted together). Dont overtighten !
With this file you will be able to print Ender 3 Front X-Gantry Cable Support with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Ender 3 Front X-Gantry Cable Support.