Ender 3 Filament Holder (for angled mount)

thingiverse

Requirements ------------------- You must print out the rest of the parts from the source of this remix. This is just the roll holder, which replaces "FilHolder_80mm_V1.STL" in the source. At a minimum, you also need to print "FillerBraceCrealityNut.stl" and "FilRoller_80mm_V1.STL" from the original. [Download those parts from the source model](https://www.thingiverse.com/thing:3209211) Issue ------- The source of the remix used a top mount filament holder that is standard on the Ender 3 Pro, and other Creality printers. Using that model on an angle-mounted, such as [this simple one](https://www.thingiverse.com/thing:3564351), bracket causes friction between the filament roll and holder, which somewhat defeats the purpose of using it. Solution ----------- This remix re-angles the holder to allow for a slightly more upright roller, which gives enough clearance for a roll of filament to unwind without scraping the structural sides of the holder. It works, with that said... This is my first 3d model. I used Prusa Slicer to clean up the STL before printing. Cura complained about a manifold issue that I couldn't resolve. Feel free to take the idea and share a better model.