Ender 3 Filament Guide Remix

thingiverse

Remixed from: https://www.thingiverse.com/thing:3129612 Changes: - Bearing fit was bit tight for my 608 bearing, so made the hole a bit bigger; there are two versions, 22.3mm and 22.5mm. I'd use the 22.3mm one and you're gonna need a bit of force to get the bearing in. I just pushed down with my weight and it got in there. - My Ender 3(July 2021) came with an extra M4x16 screw which I decided to use for the retainer. I changed the mount and retainer to fit this screw. - The retainer was slightly too small to fit on the mount for me, so I made the hole a slight bit bigger so it would fit nicely Install: Refer to images Note that for my July 2021 Ender 3, I had to reverse the screw that was right above the QR Code(on the x axis motor) on the left-hand side of the printer(when facing the front side with the LCD screen). I had to do this so that the nut would fit nicely with the guide mount. You could also just change the hexagonal nut shape to fit the circle shape of the screw, but reversing the screw took less than a minute to do so I'd recommend doing that instead. To Print: x2 "Pully_half_22.3mm_best.stl" OR x2 "Pully_half_22.5mm_slightly_loose.stl" x1 "Guide_Mount.stl" x1 "Guide_Retainer.stl"