Ender 3 Feet

thingiverse

These feet are designed to fit any printer that uses a 40mm wide extrusion as its base. I employed silicone rings as vibration dampers and non-slip feet. The feet lift the printer up by 16mm, allowing me to utilize my own electronics enclosure, which extends 10mm below the printer. The feet fit the Number 8 rings from Aliexpress: https://fr.aliexpress.com/item/32886928396.html?spm=a2g0s.9042311.0.0.27426c37nI7SgG If you purchase silicone rings, you will need to buy two packs because each pack comes with three rings. I designed this part so that the silicone ring fits into the main body, and the inner fixture screws in from the bottom to clamp the ring in place, also allowing the screw to push up against the extrusion to secure the feet firmly in position. I used M3x10mm screws for this purpose. I created a replica ring, which can be printed with TPU. However, this is untested because I don't have any TPU filament available. If you print it in TPU and find that it works, please let me know.