Ender 3 Drawer Case Skeletonized

prusaprinters

<p>This is a (more) skeletonized version of the drawer housing for Littlefiver's Ender 3 Double Drawer - <a href="https://www.thingiverse.com/thing:3372977">https://www.thingiverse.com/thing:3372977</a></p><p>I cut holes in the drawer housing, as it takes a very long time to print, and the only surface that really needs to be solid is the top. This part does not need much structural strength at all, so removing material does not hurt anything.</p><p>I may come back and upload drawers and other parts of the original design, if Littlefiver modifies the drawers, so that they no longer fit my housing.</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Creality</p><p><strong>Printer:&nbsp;</strong></p><p>Ender 3</p><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports:&nbsp;</strong></p><p>No</p><p><strong>Resolution:</strong></p><p>0.22mm</p><p><strong>Infill:&nbsp;</strong></p><p>65</p><p><strong>Filament:</strong> eSun PLA+ grey</p><p><br>&nbsp;</p><p><strong>Notes:</strong></p><p>&nbsp;</p><p>Notes:<br>Printed with a 0.4mm Nozzle, 0.4 line width and wall count of 3 (1.2mm). You can go up to 120% of nozzle diameter for your line width, but this was one of my first prints, and I didn't know that. I would also suggest getting and learning to make use of a 0.6mm nozzle.</p><p>If you ever plan to use an enclosure, don't use PLA, use ASA, ABS, or PETG.</p><p>Printed okay without supports, except needed to use a file to make the drawers slide easily.</p>