Ender 3 Cable Chain Mount for Bondtech Extruder with slim chain links for x axis

thingiverse

I have been using the extruder mount by norp using the slim links until I switched to a bondtech BMG, but still wanted to reuse the slim links. I remixed the bracket The_West_Lab created to include the slim chain link from norps mount. NOTE: I am fairly new to 3D printing, you may look at this and wonder why something is the way it is, that is because it's my first time, but it's functional. Feel free to improve on it. I have this mounted on an Ender 3 v2 using this Bondtech BMG mount, with the BMG mounted sideways. https://www.thingiverse.com/thing:3117704 I'm using the slim links from norp, along with his hotend mount. https://www.thingiverse.com/thing:4314829 For the X & Y axis, I'm using the bed cable mount mount from WiredEarp, along with the hotbed mount and his loose chains. I tried MANY different chains, on different print settings, and they all bind up quite a bit. I gave his loose chains a try and wow, they easily move and are much better than any others I've tried. https://www.thingiverse.com/thing:4645166 UPDATE: I have added V2, it just makes the wall thicker on the slim connector, so it is more resistant to cracking. I had a few break when trying to remove supports. I also have added a "slim only" which removes the normal chain link connector. This is useful if you have a "mirrored" BMG aka left hand. This would put the thumb screw right under the normal chain link connector which will not work. If you have the mirrored BMG, you can use the Extruder_Chain_Mount_v20.stl below to mount the chain to the extruder then use the slim only to mount the chain for the extruder to hotend. https://www.thingiverse.com/thing:5191531