Ender 3 4.3 inch touchscreen mount

prusaprinters

<p>Hi, this is my first model upload so if anything is missing post a comment,recommended need and if possible I will get that resolved</p><p>Things required to assemble</p><p>The Screen itself I use <a href="https://www.cytron.io/p-4p3-inch-dsi-800x480-dsi-capacitive-touchscreen-ips-lcd">this</a></p><p>4 M3x6 Screws</p><p>4 M2.5x4 Screws (you can also use M2.5x6 screws)</p><p>2 M5 Scews (can be any length if you already have the screw that is used to mount the ender electronic box or screen you can use that)</p><p>&nbsp;</p><p>both parts of the model needs to be printed</p><p>the backing can use any infill I use 10% on mine</p><p>the frame should be printed at 100% infill lower is usable but not recommended</p><p>&nbsp;</p><p>Assembly Instructions</p><ol><li>Print Both Parts</li><li>connect the DSI display cable</li><li>attach the screen onto the backing plate using M2.5 screws</li><li>attach the backing plate with the screen onto the frame using M3 Screw</li><li>If you're using an ender 3 v2 or S1 you will need to tap the screw hole</li><li>attach the Display assembly to the printer using M5 screws</li><li>setup the display like you would</li><li>Done!</li></ol>