Ender 2 - Y Axis Dual Damper Support

thingiverse

If your bed connector doesn't currently clear the top of your Y stepper motor, this mod won't work for you. The connector will hit either the second damper or the mod itself before it hits the Y endstop. You'll need a taller endstop holder or an adjustable one for Z first, then level your bed so that it clears the stepper. --------------------------------------------------------------------------- Ender 2 support for the Y Axis allows for Dual Dampers. Installation (Updated): Remove the Y motor mount from the machine (stock metal bracket). Install the Dual Damper Support arm into the 2020 extrusion. Attach the second damper to the backside of the motor. Slide the stock mount back into the extrusion (like it was originally). Screw the backside damper into the support arm. Tighten down the stock metal bracket. Tighten the belt as per normal and re-attach cables. Stock Motor Screws (yours may vary): M3 x 25mm Updated Motor Screws (5mm longer than stock): M3 x 30mm Support Mounting Hardware: 2x M3 x 10mm 2x M3 T Nuts (drop in)