Ender-2 / Cr-10 Filament Guide PTFE tube version (snug fit)

thingiverse

I needed something to increase the angle of the filament from spool to extruder on my Ender 2. I realized that a piece of PTFE tube would make a big difference. So, I decided to remix this thing. I saw another remix for PTFE tube, but it wasn't a snug fit, so I decided to create my own. I used this PTFE Tube: https://amzn.to/2pWjQiT Print Settings: Infill: 100% Layer: 0.2mm Support: yes Raft: no Print-time: approximately 1 hour Used filament: Nunus PETG: https://amzn.to/2pRUC4U I used the following tape on my CR-10: http://amzn.to/2zXjJGu. This stuff is really great - no extra glue needed, 100% sticky to the printed parts, which come off really easily, even without destroying the tape. On my Ender-2 I use a 1mm carbon plate coated with kapton tape: http://amzn.to/2nPggqi. Extra Tip: Another very hot tip is to use kapton tape! Here you get the glossy finish and perfect adhesion like with the blue tape! Look at this: 200mm Kapton tape: http://amzn.to/2nPggqi. Have fun! (Amazon Affiliate Links)