End Tap Wrench 24 & 28 mm with dual density Infill
thingiverse
This is a straightforward tool for mounting and unmounting End Tap 24(22)mm & 28(26)mm. I based this design on a handy, yet inexpensive tool available at https://s.click.aliexpress.com/e/_dThAWYH. There are three STL files to choose from: End Tap 24.28mm Reinforced Wrench Single Part End Tap 24.28mm Reinforced Wrench Multi Part P1 & P2 You can print a single part, but it needs at least 80% infill for durability. Alternatively, you can use the multi-part files to save filament; the inner part will have 100% infill, while the outer part can be set to any desired infill percentage (30% is suggested). When using Slic3r, detect the multipart object and answer NO. Place both parts on the heatbed and click Edit for each. Add Infill and adjust parameters as needed. The resulting multi-part object should resemble the picture with blue and red sections. Happy printing! If you're satisfied, please share your print. You can find more of my designs at https://www.thingiverse.com/Renba/designs.
With this file you will be able to print End Tap Wrench 24 & 28 mm with dual density Infill with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on End Tap Wrench 24 & 28 mm with dual density Infill.