Enclosure -IKEA Lack table foldable door

prusaprinters

<p>This is my version of the IKEA Lack enclosure. It is higher to put a plate of foam and concrete plate/ stone plate under the printer to reduce noises and vibrations. Thats why you need bigger plexiglas with the following dimensions:</p><p><strong>3x plexi 445mm x 500mm (3mm thick)</strong></p><p><strong>2x plexi 220mm x 500mm (3mm thick)</strong></p><p>I recomment to print all parts one by one for better print results. No support needed. All corners are labeled. Mount them as shown in the 3D drawing.</p><p><strong>16x rounded head screws M4x20</strong> (to mount the legs on the top corners)</p><p><strong>4x rounded head screws M4x20</strong> (for the bottom plugs)</p><p><strong>16x rounded head screws M6x60</strong> (to mount all corners) I used 3 screw for each top corners for more stablity.</p><p>The hinges are printed in place. You just need to break them open. You will hear a crack. Move them a few times and they are ready. For the hinges you will need:</p><p><strong>6x socket head screws M3x10</strong></p><p><strong>6x nuts M3</strong></p><p><strong>2x magnets ø10x3</strong></p><p><strong>1x countersunk screw M3 </strong>(for the door stopper)</p><p>You can find other prints I used for the enclosure in my collection: https://www.printables.com/de/social/164124-chrissl/collections/223864</p>