Enclosure for Uctronics U2663 DC buck converter

prusaprinters

<p>This is a two part box enclosure for a Uctronics U2663 DC buck converter board. &nbsp;The board is configured for 5.2v output at up to 5 amps (current max is input voltage dependant). &nbsp; It has openings for terminal block input and USB output. &nbsp;It does not accomodate the barrel plug input or terminal block output. &nbsp;Ventilation slots are present on 4 sides. &nbsp;I acquired the board for powering a Raspberry Pi 4 B from a 12v source.</p><p>I have printed it both in filament and resin. &nbsp;Both work. &nbsp; Friction fit on the filament print is sufficient to keep the lid in place, a bit of CA glue was used to secure the lid on the resin print. &nbsp; Input wires should be secured in the terminal block before fitting the lid.</p><p>This was my source for the board:</p><p><a href="https://www.amazon.com/UCTRONICS-Converter-Transformer-Voltage-Regulator/dp/B07XXWQ49N">https://www.amazon.com/UCTRONICS-Converter-Transformer-Voltage-Regulator/dp/B07XXWQ49N</a></p>