Enclosure for MKS DLC32 V2.1 with TS24-R V2.0

prusaprinters

<p>Here is an enclosure I designed for the MKS DLC32 V2.1 and the accompanying TS24-R v2.0 touchscreen. It has vents and opening for a 30mm fan for cooling the drivers. At the rear, power, USB, and TF card are accessible, as well as an opening for cabling.&nbsp;</p><p><strong>Printing:</strong></p><p>Print the main enclosure in the default orientation. Print the lid with supports and rotated 15 degrees on the X axis so that the face lays flat on the build platform.</p><p><strong>Fitment:</strong></p><p>The lid friction-fits into the main enclosure, but the lip around the lid may need to be filed down a bit to fit, depending on your printer's calibration and slicer settings.</p><p><strong>Assembly:</strong></p><p>The DLC32 board is secured with two M3 screws opposite the rear ports, but fits pretty snug without them.</p><p>The screen is attached via four M3 screws with matching lock nuts.</p><p>The fan is attached with two coarse-threaded fan screws from the inside of the enclosure. Alternatively, you could use two M3x20 screws with matching lock nuts.</p><p><strong>Note:</strong></p><p>The holes for the reset and power switches were added after printing. I left the top edge blank for any customization someone may want.</p><p>&nbsp;</p>