Enclosure for DROK DC 12V Micro Stereo AMP

thingiverse

I purchased this amp https://www.amazon.com/gp/product/B010LRBGGS/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 to power some basic speakers in my creativity room and needed an enclosure for it. The amp has a hole for a rocker switch (specifically, this one: https://www.amazon.com/gp/product/B00X40G9EO/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1). My design includes mounts on the sides that fit perfectly into holes in my elephant rack. If you want to see the rack, I can upload either the STL file with the mounts or just the mounts as a separate object that can be placed anywhere on the enclosure. The mounts fit so well and this setup meets my needs perfectly. I originally designed it with pin holes to hold everything together, but its own friction and pressure do the job. The bottom is a bit tight and causes the top part to bend slightly, which doesn't affect anything at all. There are mounting posts for the holes in the PCB. I had four originally, but one would always snap when installing the board, so I removed it. The base for all four holes remains, holding the board in place very well. Print Settings: * Printer: Qidi Tech 1 * Rafts: No * Supports: No * Resolution: .3 * Infill: 15% * Notes: If you arrange it right, you shouldn't need supports. When I printed with the mounts, I forgot to turn on supports and fortunately, it turned out okay. The only print flaw is on the top side of the mount, so it doesn't cause a problem.