Enclosure brackets

thingiverse

These brackets are designed to fit any printer perfectly. To build your enclosure, you need to measure your printer carefully and find the exact aluminium angle iron lengths required, then attach them securely to these brackets. This design is specifically intended for attaching 25mm aluminium angle iron with a thickness of 2mm. To print a box, follow these steps: 1. Print Corner.stl eight times. If you're building a stacked box, where one box sits on top of another, you'll need to print: 1. Corner.stl eight times. 2. Divider.stl four times. This design is specifically made for 6mm(M6) nuts and bolts. Before you start, measure and cut your aluminium angle to the exact lengths needed and drill M6 holes carefully. Make sure to mark where the holes should be drilled on the angle iron. Once you have your enclosure built, fit polycarb or clear plastic to its dimensions (don't forget to include a door for easy access to your prints). If you do print these brackets, please share some pictures of your finished prints with us.