EMT Electronics Flat Mount

prusaprinters

<p>Inspired by the EMT Conduit Case by Steep, and remixing parts from Allted's Conduit clamps and his End Stop Mounts, I created a place to bolt on my raspberry pi, and a 7in touchscreen monitor. I am still working on my software, but the plan is for this to be a network monitor, so I can tell at a glance which parts of my Internet and network might be broken.</p> <p>The STLs are just the "left" side, which you can mirror in your slicer to get the other side. The clamp_left is the part that attaches to the stuff, and the end_left holds the EMT conduit in place. The clamp parts can also be installed with the mount closer to the board, like I did for the pi, which gives a little more flexability in the depth.</p> <p>If you have a 7in touchscreen (I have the waveshare) then the adjustable mounts are the same size, and you can build it just like I have. Then you can attach whatever electronics with the slots.</p> <p>Remixed from:<br/> <a href="https://www.thingiverse.com/thing:1023985">https://www.thingiverse.com/thing:1023985</a><br/> <a href="https://www.thingiverse.com/thing:1665991">https://www.thingiverse.com/thing:1665991</a><br/> <a href="https://www.thingiverse.com/thing:2771373">https://www.thingiverse.com/thing:2771373</a></p> <h3>Print instructions</h3><h3>Category: Computer Software</h3> <p>The software is far from polished, or user friendly. But I shared it in case someone found it useful as is or as a basis for something better. It's on github:</p> <p><a href="https://github.com/jeffeb3/housemon">https://github.com/jeffeb3/housemon</a></p>