Ellipso Glasses #DESIGNITWRIGHT

myminifactory

This is my totally printable project for #DesignItWright! First of all, I want to express my gratitude to the various partners who made this project possible: MyMiniFactory, Floreon 3D, Ultimaker, iMakr, Bespoke Eyewear, and Ian Wright. As you know, we had to create a pair of glasses in his image. I was thrilled to accept the challenge that was proposed. I took great care at each step to get the best possible product: reflection on the contribution of 3D printing and its technical constraints, sketches, modeling, printing of the three objects, taking photos. So, I hope that the result will please you, organizers of this magnificent event. Reality should meet virtual when Ian Wright tries my "Ellipso Glasses" model, as the synthesis imagery published on the web page of this project. I would be extremely happy if my design pleases Ian. Tips and parameters for a good print result: All parts are optimized for these settings: (I think these are the most common features currently found on large public machines and RepRap machines manufactured at home.) Nozzle diameter: 0.35 mm or 0.4 mm Layer Height: 0.2 mm or 0.1 mm Wall Thickness: 0.7 mm or 0.8 mm Infill: 20 percent Top and Bottom Thickness: 0.6 mm Brim: YES / Width 10 mm Support: YES / Touching bed / Lines / Overhang Angle: 45° / Fill Amount: 15 / Distance XY: 0.8 mm / Distance Z: 0/0 mm Print with different colors and try different combinations. Have fun!