Elecrow 7 inch LCD screen case (no gluing required)

prusaprinters

<p>This is a remix of the '7 inch LCD Case' by arrowmeiwaracing, which can be found <a href="https://www.thingiverse.com/thing:3055029">here.</a></p> <p>I was looking for a case for my Elecrow 7 inch LCD screen to be used as a touch interface for my Octoprint server, I came across the original by arrowmeiwaracing but noticed it was in multiple parts, my printer is big enough to do the parts in a single piece so I used Fusion 360 to modify the relevant parts.</p> <p>I might be designing further mounts to use this screen.</p> <p><strong>After printing version 1 myself, I have noticed that the clips are pretty much useless</strong></p> <p>The case I have printed is held together with:</p> <p>4 off M3*12 hex socket cap head bolts<br/> 4 off M3 nuts</p> <h3> Version Details:</h3> <h3> Version 1</h3> <p>Version 1 is the same as the original by arrowmeiwaracing, but is in a single piece so no glueing is required</p> <h3> Version 2</h3> <p>Version 2 has places for captive M3 nuts in the case body, this makes the case much easier to assemble</p> <h3> Version 3</h3> <p>Version 3 retains the captive M3 nuts, and the details for the case clips have been removed to make a sleeker looking case.</p> <p>If you want to see how I used octoprint to automatically turn the screen on and off go and have a look at my github repo <a href="https://github.com/darraghbr/octoprint-uhubctl-setup">here!</a></p> <h3>Print instructions</h3><h3>Category: Electronics Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> <a href="http://amzn.to/2rqZ6Uo">i3 MK3</a></p> <p><strong>Rafts:</strong> Doesn't Matter</p> <p><strong>Supports:</strong> Doesn't Matter</p> <p><strong>Resolution:</strong> 0.15</p> <p><strong>Infill:</strong> 20%</p> <p><strong>Filament:</strong> rigid.ink PLA Orange</p>