Elecom EX-G Pro adjustable stand

thingiverse

Yet another Elecom EX-G Pro stand. This stand has the possibility to regulate the angle of inclination from 0 to around 46 degree. Aside the printed parts the BOM includes: + 6 M3 nuts; + 1 M3x40mm screw; + 1 M3x50mm screw; + 4 M3x5mm screws. ## Printing tips Use the printing orientation as shown in picture. Use standard setting except for the leveler: I suggest to print it with many walls to improve its robustness. Supports are not necessary. The design of the top plate is remixed from https://www.thingiverse.com/thing:3983797 , whereas the design of knobs are remixed from https://www.thingiverse.com/thing:3778822 . ## Known bugs + The maximum inclination angle is limited to about 46 degree, for my taste must be extended by further 5 degrees, pretty much; + At the maximum inclination the trackball is somehow not well balanced: at high angles it si better to provide a "ballast" on the bottom of the stand.