El Ghetto Streamhack ( Streamdeck knock off )

thingiverse

Very simple 5x4 streamdeck style hotkey controller. Parts Needed: 20 MX Cherry keys ( or any other mechanical key with same dimensions ) Teensy / Arduino Micro USB to USB B Panel adapter Thin insulated wire Solder / Soldering Iron Instructions: ( recommend printing top first and wiring it while base prints ) -Insert all the mechanical keys into the top of the ElGhetto -Solder 1 peg of each button to 1 of the pegs of each other button so that 1 pin of each button is connected to eachother -Solder a wire with length of your choosing ( use your better judgement based on the thickness of wire , there will be 20 of these and they will have to bundle up and squish into the housing ) -Solder wire from each button to a pin on the teensy / arduino -Solder a wire from a peg that has the wire runs across all the buttons to the ground pin on the teensy / arduino -Once bottom is done printing, screw the USB B panel adapter into it , noting the orientation of the connector if you use a 90degree cable -Once USB B panel is screwed in , plug the adapter into the teensy and sandwich the whole thing together , the top simple pops into the base! ( you may have to sand edges of the top plate to fit into the bottom casing ) -Once it's together, upload the arduino sketch provided to it, and you should be good to go! The ElGhetto sends F13-F24 and ALT + CTRL + numkeys in the arduino script which seems to work great for me so far with OBS and LioRan