EKWB EK-FC compatibile Terminal

thingiverse

EKWB waterblock terminal aka EK-FC, one with barb made to fit silicone hose and 'universal' for g1/4 fittings (which is harder to print due to threads). Designed for 0.4mm nozzle >10 perimeters 0.2 layer, 0.4 width support from bed only print on a side, oblong holes (those that mate with the waterblock) facing up print slowly, without part cooling, stagger seams, fill gaps, 25% overlap, outside perimeter first Print spacer as tall as needed, according to length of your M4 screws V2 is designed for silicone gasket maker, although standard rubber gasket will probably work with it as well. V3 is for gasket maker (aka RTV silicone) only. V5 requires very good layer adhesion - print at low speed, no part cooling, at high temperature to fuse the layers together. Otherwise thread may fail under stress.