Ejection seat for L-39 Albatros jets

prusaprinters

<p>This model is an ejection seat for the L-39 Albatros jet from customwings.cz in scale 1:3.5. The seat's size had to be adjusted a little bit to fit into the cockpit of the customwings model because the cockpit is a little bit smaller as the original cockpit scaled down to 1:3.5, but I also can provide you with an original 1:3.5 scale model if required.</p><p>Though most ppl will paint the seat components I printed the different parts in three different colors. The color is part of the STL filename where gr is grey, sw is black and ws is white.</p><p>all parts are printed in Prusament PETG with original Prusa settings with following parameters:</p><p>Layer hight: 0,2mm</p><p>Infill: 30 %, cubic and monotonic&nbsp;</p><p>All parts are assembled with M2 pan-head screws and/or glued with 2-component resin. The thin headrest supports are made of 2.5mm aluminium tubes.</p>